Customize Your Product

Model Selection
48C Z425/Z445 [Add $0.00]
Chute(BM21681) Power Flow(BM21871)

54C Z425/Z445 [Add $0.00]
Chute(BM21681) Power Flow(BM21873)

48/54 High Capacity Z645/Z655 [Add $130.00]
Chute(BM21681) Power Flow(BM23635)

John Deere 2 Bag 6.5 Bushel Power Flow Bagger For Zero Turns (BM23634)

  • 2 Bag System
  • 6.5 Bushel Capacity
  • Turbo Assist
  • Fits Z425, Z445, Z645, Z655
  • (2011 and newer)
Your Price
  • Turbo Assist
John Deere Zero Turn Mower Power Flow Bagger (229-L)

The John Deere 2-Bag, 6.5 Bushel Rear Bagger fits select models of John Deere Zero Turn Lawn Mowers for 48" and 54" mower decks. It provides a quick, easy, and clean method of collection leaves and yard scraps when mowing the lawn.

  • Tapered dual-bag design makes it easy to dump clippings
  • Open-weave bags provide better airflow for more efficient pick-up
  • CargO Mount System assembly just inserts into cargo mounts

The blower housing and fan are made out of polyethylene:
  • Lightweight for easy handling and minimal effect on mowing smoothness
  • Will not rust or corrode
  • Resists wear and abrasion caused by sand
  • Contoured design for clean appearance and smooth grass flow
The blower assembly attaches to the side-discharge mower with an over-center latch.

The fan is driven with a V-belt from a sheave added to the top of the right mower spindle

Fits 2011 and Newer John Deere models:
Z425, Z445, Z645, Z655
    The hopper design provides efficient bagging performance, clean operation, and easy-to-empty bags:
    • Two durable bags give a generous, 6.5-bu (230-L) capacity.
    • The bags lift out for easy emptying.
    • Efficient chute provides a smooth flow of material to reduce the chance of plugging.
      • Z425 and Z445 use a chute in conjunction with the Power Flow blower.
    • Standard mower blades are used for bagging.
    • Air exhaust duct directs air from the hopper back and toward the ground for clean operation.
    • Convenient latch makes opening and closing the hopper easy.
    • No-tools installation makes the hopper easy to install and remove. No tools are required after initial installation.
    • Two 15-lb (7-kg) weights are included for installation on the front of the vehicle to help counterbalance the weight the the hopper.