John Deere 1026R Sub Compact Utility Tractor

MODEL NO. JOHN DEERE 1026R
  • Replaced by: John Deere 1025R
  • 26HP Diesel Engine
  • 4WD and Power Steering
  • Hydrostatic Transmission
  • Included Attachments:
    • Front Loader
    • Drive Over Mower Deck
MSRP: $17,399.00
Price
$14,999.00
  • SOLD OUT
  • DISCONTINUED
QUANTITY
888-284-9606
John Deere 1026R Sub Compact Utility Tractor Package

Replace by: John Deere 1025R


Features of the 1 Series Tractors include mower decks with AutoConnect™, position control 3-pt. hitch, deluxe padded seats, high-wattage headlights, and a two-second height-of-cut setting.
Yanmar TNM 26HP Diesel Engine
  • Interim Tier 4 (IT4)-compliant isolated Yanmar Diesel Engine
  • High-torque reserve provides plenty of power under heavy load, yet retains excellent fuel economy
  • Full-pressure lubrication system provides filtered oil under pressure to all vital engine parts
  • Single-piece side panels and front grille screen provide excellent air flow and can be removed for easy and quick access to the engine
  • Horizontal exhaust discharges fumes away from the operator station, reducing noice and improving operator visibility and comfort
Easy Operation 4-Wheel Drive and Power Steering
  • Both 4-wheel drive (4WD) and power steering are standard on the 1026R, allowing for excellent maneuverability and easy of operation of the tractor
  • Narrow overall width allows the 1026R to work in tight areas where most compact tractors cannot fit
  • Power steering means fewer turns of the steering wheel compared to manual steering, which becomes a valuable feature when used with a front loader or other attachments
  • High horsepower-to-weight ratio allows for easy completion of a variety of tasks, while the overall reduced weight makes for an excellent mowing tractor
Hydrostatic Transmission with Twin Touch foot controls
  • Fluid under pressure transmits engine power to the drive wheels through a hydraulic pump and motor
  • The hydrostatic drive unit functions both as a clutch and transmission
  • Twin Touch foot controls allow selecting both speed and direction of travel with the touch of a foot, ideal for jobs where productivity is a must
  • Infinite ground speeds, even at full throttle, to match the job
  • Large foot pedals were designed for operator comfort and allow for convenient operation of the tractor



Manufacturer
MODEL
John Deere
1026R
Engine
Manufacturer Yanmar 3TNV76
Engine HP (kW) - gross 25.2 (18.5), PS
PTO HP (kW) - Hydrostatic transmission 18 (13.4) per SAE
Rated engine speed, rpm 3200
Cylinders/Displacement, cu. in. (liters) 3 / 68 (1.115)
Engine Torque @ rated speed, ft./lb. (N/m) 40.7 (55.2)
Fuel Tank Cap., US Gal. (L) (Open; Cab) 5.6 (21.2)
Electrical
Battery Size (CCA) 500
Alternator (12 volt, amp) 40
Transmission
Std. Transmission; Forward/Reverse Hydrostatic - 2 range
Direction Reverser; Forward/Reverse No; Twin Touch Pedals
Final Drive Spur gear
Brakes Wet disk (left hand pedal)
Steering Power
Hydraulics
Type Open Center
Pump Rated Output, gpm (L/min.) 6.3 (24)
Steering 2.8 (10.8)
Implement 3.5 (13.2)
Pump Type Gear
Maximum Operating Pressure (PSI) 2000
Draft Control Type Position Control
Remote Control Valves Available 2
3-Point Hitch
Type Limited Cat. 1
Lift Capacity (24-in. behind link arms), lb. (kg) 681 (309)
Power Take-Off (PTO)
Standard Rear @ 540; Mid @ 2100
Control Independent
Clutch Wet disk
Brake (for Mid and Rear PTO) Wet disk
Final Drive
Type Spur Gear
Engage On-the-Go Rear Differential Lock Yes
Operator Station
Rollover Protective Structure OSHA, SAE, ASAE, EEC
Rigid - Foldable - Telescopic Foldable
Platform - Flat/Straddle One-piece semi flat
Gear Shift Location - Console/Floor Left Hand Side
MFWD Dimensions
Wheelbase, in. (mm) 57.1 (1450)
Front Tread Range, in. (mm) 36.1 (918)
Front Axle Clearance, in. (mm) 7.7 (195)
Turning Radius w/o Brakes, ft. (m) 7.4 (2.25)
Approx. Ship Wgt, lb. (kg) Open; Cab 1444 (655)
Standard Tires
MFWD ---
Front 18X8.5-10 R4
Rear 26X12-12 R4
Miscellaneous
Underhood Muffler Yes
Joystick SCV Control Yes