Exmark Pioneer S-Series 20.5hp 48" (PNS651KA483)

  • 20.5 HP Kawasaki Commercial
  • 48" UltraCut Series 3
  • Mow up to 2.75 acres/hr
Call For Pricing
  • $500 Instant Rebate
  • 0% Financing for 48 mo.
  • Due to Exmark's policy, we are
  • unable to advertise prices online
Exmark Pioneer S-Series 48"

The Pioneer S-Series is the most affordable commercial grade mower on the market. The 44" mower deck of the PNS651KA483 is a patented deck design to offer performance and efficiency in all grass conditions. The 48" Pioneer is also being powered by a full commercial Kawasaki engine with heavy duty air filter.

The S-Series 48" Pioneer can reach top speed up to 9mph for max productivity with its twin commercial grade hydrostatic transmissions. The Pioneer will also keep you comfortable with coil spring suspension seat with armrest paired with larger rear tires to absorb even more bumps.

4 Year Homeowner/2 Year Commercial Warranty

Exmark Pioneer Kawasaki Engine
651cc Kawasaki FX Series V-Twin Engine
  • Overhead valve creates more power with less fuel consumption
  • Electronic ignition and Smart Choke allows for easier starting
  • Heavy duty components improves engine life
  • Dual element air cleaner
  • 7 gallon fuel capacity means less down time re-fueling
Pioneer Ultra Cut Series 3 Deck
48" UltraCut Series 3 Mower Deck (3 Blade)
  • 1.5" - 5.0" cutting height in .25" increments with foot assist and auto-lock
  • Fabricated steel deck with reinforced edges improves rigidity
  • Moisture resistant, grease-less spindles for reduced maintenance
  • 5" depth and 18,500 fpm blade tip speed gives Exmark's signature cut
  • 4 point suspension allows for full float for reduced yard scalping
Hydro-Gear 3100 Transaxle
Dual Hydro-Gear ZT3100 Hydrostatic Transaxles
  • Speeds up to 8 mph forward and 5 mph reverse
  • External oil filter and remote reservoir for easy maintenance
  • Charge pumps to increase speed with relief valve for added protection
  • Integrated cooling fans for heat reduction during prolonged use
  • Larger axle and heavy components improve durability 
Pioneer Seat
Other Features:
  • Foldable roll over protection system
  • Bolstered commercial high back seat with armrest
  • 22x9.5-12 rear tires

Engine: Kawasaki®
Model: FX651V
Air Filter: Heavy-duty canister air filtration system
Drive System: Two Hydro Gear ZT3100 hydrostatic transmission with charge pumps, relief valves, no hoses, integrated cooling fans, remote reservoir, spin-on filter and heavy-duty components.
Speed: Infinitely variable speed selection from 0–8.0 mph (12.9 kmph) forward, 0–5.0 mph (8.1 kmph) reverse.
PTO Engagement: MagStop electromagnetic 175-ft-lb clutch
Fuel Capacity: 7-gallon (26.5-L) single fuel tank with single fill location.
Drive Wheel Release: Allows unit movement without engine running.
Safety Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
Rollover Protection System (ROPS): 2-post foldable ROPS standard with seat belt and latch.
Casters: .38" thick double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups.
Cup Holder: Standard
CARB Compliant: No
Deck Construction: 10-gauge top that is formed and welded with reinforcement/guard on leading edge.
Deck Style: Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch.
Width: 48" (121.92 cm)
Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat.
Blades 3 Blades at 16.25" Length
Blade-Tip Speed Approximately 18,500 fpm.
Tractor Frame: Unibody, welded, heavy-duty 2" square tublar steel.
Steering Control: Hydraulically dampened twin levers adjustable both fore and aft. Also has 3-position height adjustment.
Front Caster Tires: 13 x 5.0-6, smooth tread, pneumatic.
Drive Tires 22 x 9.5-12 Kenda Tires
Parking Brake Lever-actuated pawl brake.
Seat Commercial Grade High Back contoured foam padded with armrests. Hinged mounting, spring suspension. Adjustment: Fore and aft from Operators’ Position.
Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm(.98\")diameter spindle shaft and splined blade driver.
Electrical 12-volt battery with 15-amp alternator.
Curb Weight: 862 lbs
Length: 78 in. (198 cm)
Width: 60 in. (152 cm)
Height: 72 in. (183 cm)
Warranty: 2 Year Comm / 4 Year Cons