Shaver HD-10 Post Driver

Shaver HD-10 Post Driver 

Call for Details

No Freight Delivery Available


Shaver HD-10 Post Driver

Shaver HD-10 Post Driver

The Shaver HD-10 Post Driver is a regular use, low maintenance, driver designed to give property owners and contractors the ability to drive 6" post or larger in most conditions on most terrain. It will save considerable time and money over operating other machines and methods of placing posts.

For more information, call one of our experienced salesmen at 1-888-284-9606! Call or email us today!


The Shaver HD10 Post Driver delivers 71,500 lbs. of impact force at full stroke.
  • The Shaver HD-10 Post Driver will drive a 6" post in 15 seconds or less in most conditions.
  • In most conditions, the Shaver HD-10 Post Driver can drive posts up to 8.75".
  • In most conditions, the Shaver HD-10 Post Driver will drive most posts in 10-20 seconds.
The Shaver HD 10 Post Driver has only 8 moving parts.
  • By minimizing moving parts, fail points are reduced resulting in considerable savings in operating cost over other machines.
  • Serviceable components are stocked and readily available at dealers, distributors, and warehouses to get you back to work quickly, reducing lost time.
  • The simple straight forward design of the Shaver HD-10 Post Driver, allows for repairs and maintenance to be done in the field by the user. This reduces repair and service cost over other machines.
The Shaver HD 10 Post Driver tilts up to 15º front-to-back and left-to-right.
  • Allows the user to adjust the driver to terrain to maintain a straight fence line.
  • Allows the user to adjust the driver between strikes, allowing the user to drive the post straight as it hits rocks and tough soil.
  • Allows the user to apply pressure to a post that needs to be straightened as it is driven.
The Shaver HD10 Post Driver can mount on a Category II or III Three Point Hitch.
  • Allows the user to select the most appropriate tractor size for the job.
  • By utilizing a smaller tractor the user will incur less fuel cost than on a larger machine.
  • The Cat II or III hitch option provides the opportunity to mate the driver with most utility or row-crop tractors.
The Shaver HD10 Post Driver requires 12 GPM at only 1,500 PSI to operate.
  • Allows the use of the Shaver HD-10 Post-Driver on virtually any size utility or row-crop tractor with auxillary hydraulics.
  • The Shaver HD-10 Post-Driver will have little effect on the host tractor hydraulics, causing minimum wear and tear while in use.
  • The hydraulic requirements give the user an opportunity to mount the driver on a very broad age range and size of tractors.
*OPTIONAL Hydraulic Base Plate*
  • The Hydraulic Base Plate option allows for easier controls over the Shaver HD-10 Post Driver
  • Quickly and easily adjust the tilt and angle of the machine
  • Allows for complete control of the Shaver HD-10 Post Driver with safety being top priority


Manufacturer Shaver
Compatible Equipment Tractor
Intended Use Agriculture
Hyd. Flow Required 12 gpm
Mounting Type Cat. II 3-pt
Impact Force 71,500 lbs
Maximum Post Width 8"
Maximum Post Length 10 ft

Frequently Asked Questions


Join the Mailing List for Special Savings!

Get Latest Offers and Updates From Mutton Power Equipment.