Customize Your Product

Front Quick Hitch
X400/X500/X700 Garden Tractors [Add $605.00]

2210, 2305 [Add $640.00]

2320-2720, 4100, 4110, 4010, 4115 [Add $690.00]

1023E, 1025R, 1026R [Add $690.00]

Less Front Quick Hitch

Hydraulic Angle Kit
Required for operation
X400's,X500's,X700's [Add $160.00]

2210, 2305 [Add $190.00]

2320-2720, 4100, 4110, 4010, 4115 [Add $190.00]

1023E, 1025R, 1026R [Add $190.00]

Less Hydraulic Angle

2000 RPM Front PTO Kit
X400's/X700's (2WD) [Add $220.00]
BM20991

X500's/X700's (4WD) [Add $230.00]
BM22560

2210/2305 [Add $250.00]
LVB25966

4100/4110, 4010/4115 [Add $240.00]
BM18695, LVB25305

2320, 2520/2720 [Add $240.00]
LVB24900, LVB24801

1023E/1026R (No RIO) [Add $250.00]
BLV10123

1023/1025R/1026R (With RIO) [Add $300.00]
BLV10051

Less Front PTO Kit

Implement Drive Shaft
X400's/X500'x/X700's [Add $230.00]

2210/2305 [Add $230.00]

2320-2720, 4100/4110, 4010/4115 [Add $240.00]

1023E/1025R/1026R [Add $230.00]

Less Drive Shaft

John Deere 52" Quick Hitch Rotary Broom

  • X400's/X500's/X700's
  • Fits 2210/2305, 1023E/1025R/1026R
  • Fits 2320-2720, 4010, 4100, 4110, 4115

Your Price
$0.00
  • Financing Available:
  • 0% for 60 months
QUANTITY
The John Deere 52" Quick-Hitch Rotary Broom is a four-seasons attachment that can be used for a variety of tasks throughout the year. This multi-use function allows for the rotary broom to be used for a bunch of different reasons.

  • SPRING: Attach a thatching wheel kit to dethatch a variety of lawns and garden beds
  • SUMMER: Sweep off sidewalks, driveways, parking lots and more
  • FALL: Quickly clear leaves and various yard clippings off of walkways and driveways
  • WINTER: Efficiently clear up to 2" of snow, possibly eliminating the need for an additional snow blower

The 52-in. Rotary Broom is compatible with X700 Ultimate™ and 1023E, 1026R, 2305-2720, 2210, 4010, 4110, 4115, and 4100 Tractors.
 
NOTE: If a compact utility tractor is set up for an AutoConnect™ Mid-Mount Mower, the quick-connect drive shaft and rear lift link must be removed from the tractor before installing the rotary broom.

Please feel free to call us at 1-888-284-9606 for an accurate quote based on the current equipment you have.
Polypropylene Wafers
  • The 52-in.-wide brush section is assembled with 22 convoluted polypropylene wafers.
  • The wafer bristles' convoluted design provides good flicking action
  • Replacement wafers can be ordered from Parts:
    • It is recommended all 22 wafers be replaced at the same time for even wear

Center Chain Drive
  • A center chain drive provides dependable power to the broom head:
    • Large #50 roller chain is durable and dependable
    • Offset 3-to-1 reduction gearbox transfers power from the drive shaft to the roller chain drive

Shear Bolts
  • Shear bolts are provided at the outer ends of each half of the broom and also on the power take-off (PTO) drive shaft to protect against damage:
    • Shear bolts protect the broom and drive system from damage, if an abrupt impact occurs
    • Three spare bolts for the drive shaft are provided in storage holes located at the rear of the housing

Caster Wheels
  • Left and right rear caster wheels are standard equipment:
    • Provide support to the brush head for optimum ground contact
    • Measure 6-1/4 in. x 3-1/4 in.
    • Adjustable by 2 in., with four 1/2-in. spacers
    • Easy maintenance for long life through grease fittings

Easy and Convenient Adjustments
  • Large knob allows precise height adjustment of the brush head to accommodate for brush wear
  • Chain tension adjustment is conveniently located for easy adjustment

Parking Stands
  • Parking stands are standard equipment:
    • Help keep the broom level when hooking it up
    • Keeps the broom's weight off of bristles during storage
  • The storage position on the mounting brackets is convenient:
    • Stands are always attached to the broom to prevent loss
    • Two stands are provided for good stability

Drive Shaft Support
  • A wire-form support is provided to position the drive shaft for easy installation of the rotary broom

Front Quick-Hitch Mounting System
  • The broom slips over and locks into the front quick-hitch with attached snap pins:
    • Fast and easy installation with no tools or loose parts
    • Same hitch is used for blade, broom, snow blower, and snow thrower

Hydraulic Angling
  • Standard hydraulic angling allows positioning the implement straight ahead or at an angle:
    • Straight ahead and infinite positions left or right
  • The operator can change the angle from the tractor seat for increased productivity
    • Allows moving material off to the side and out of the way
    • Allows working in a back-and-forth operation (no need to deadhead back to the origin)
  • Minimizes driveline vibration in rotary broom applications, when the broom is angled
  • Power take-off (PTO) shaft U-joints enable minimal vibration

Front Power Take-Off (PTO)
  • The front implement is powered by the tractor's 2000-rpm front PTO:
    • Engaged by the tractor's PTO clutch for smooth startups and a long life
    • Easily installed and removed from tractor
  • Can remain on tractor for front blade, rotary broom, and snow blower applications
Clearing width:   
Broom straight 52 in. (1321 mm)
Broom angled 27 degrees 48 in. (1219 mm)
Brush specifications:   
Diameter 21 in. (533 mm)
Material Polypropylene
Number of wafers 22 convoluted
Drive Front power take-off (PTO)
Sweeping height 9 positions in 0.5-in. (13-mm) increments
Speed 220 rpm
Top speed 1209 fpm (369 m/min)
Hydraulic angling positions:   
Right and left 0 to 27 degrees
Unitized structure material:   
Housing 14- and 16-gauge steel
Frame 1/4-in. plate and 1-1/2 in. tube steel
Lateral float  Hitch clearance
Drive system:   
Input Telescoping drive shaft
Center drive #50 roller chain from offset 3:1 gearbox
Brush shaft Oil-filled metal flange bearing and thrust bearing, greaseable
Caster wheels:   
Size 6-1/4 x 3-1/4 in. with grease zerks
Adjustment Four 1/2-in. spacers
Storage stands  Standard equipment
Weight (broom only) 240 lb (109 kg)
Shipping weight 306 lb (139 kg)
What John Deere Tractors and Lawn Mowers is this Rotary Broom compatible with?

The 52-in. Rotary Broom is compatible with:
  • X700, X720, X724, X728, X729, X740, X744, X748, and X749 UltimateTM Tractors
  • X465, X475, X485, X495, X575, X585, and X595 Heavy-Duty Garden Tractors
  • 1023E, 1026R, 2305, 2320, 2520, 2720, 2210, 4010, 4110, 4115, and 4100 Compact Utility Tractors
Requirements and/or recommendations - garden tractors:
  1. If not already equipped, tractor requires BM19782 front Quick-Hitch.
    • BM17347 front Quick-Hitch is not compatible with the 52-in. Rotary Broom.
  2. If not already equipped, tractor requires front 2000-rpm power take-off (PTO).
  3. If not already equipped, tractor requires hydraulic angling cylinder kit.
  4. Tractor must have dual hydraulics.
  5. Rotary broom requires implement drive shaft (BM21854) for X700 Series and X400/X500 HDGT.
  6. If not already equipped, models X700, X465, and X475 require hydraulic coupler kit (BM20761).
  7. Ballasting is not required, but additional rear ballast may be added to the tractor to enhance performance and traction when backing up slopes.
  8. Tire chains are helpful and recommended when brooming snow.
Requirements and/or recommendations - compact utility tractors:
  1. If not already equipped, tractor requires front attaching support kit.
  2. If not already equipped, tractor requires front Quik-Tatch hitch.
  3. If not already equipped, tractor requires hydraulic angling cylinder kit.
  4. If not already equipped, tractor requires 2000 rpm front PTO kit.
  5. If not already equipped, tractor requires dual selective control valve.
  6. Rotary broom requires implement drive shaft.
  7. If customer has an OnRamp™ Mid-Mount Mower, order front hitch/mid-mower combo bracket in order to retain tool-free change between front hitch and mid mower.
  8. Ballasting is not required, but additional rear weight will improve performance.
  9. Tire chains will improve performance when brooming snow.