John Deere 2025R Compact Utility Tractor

MODEL NO. 2025R
  • 25HP Yanmar Diesel
  • 4WD with Power Steering
  • Hydrostatic Drive
  • Included Attachments:
    • H130 Loader
    • 54D Mower Deck
MSRP: $20,099.00
Price
$17,999.00
  • Financing Available
  • 0% for 60 months
  • $500 off w/ 2 Implements
  • SHIPPING AVAILABLE
QUANTITY
888-284-9606
John Deere 2025R Compact Utility Tractor

The John Deere 2025R is a small framed compact utility tractor with larger tires and hydraulic system than the similarly powered 1025R.

The 2025R is ideal for mowing and front end loader work but also is effective at running a tiller and other ground engaging 3-point implements.

The 2 Series tractors are great for small estates that need a versatile tractor. With drive over mower deck, quick park front loader, quick hitch front blades, and many more attachments the 2025R is ideal for all season maintenance.

2 Year Full Coverage/ 3 Year Power Train Warranty

25hp Tier 3 Compliant Yanmar Diesel Engine
  • Environmentally friendly with lower exhaust and emission outputs
  • Indirect fuel injection reduces noise and vibration
  • Improved heat distribution for longer life expectancy
  • Auto-bleeding for easier starting after running out of fuel

Easy-to-Use 4WD with Power Steering
  • 2WD or 4WD selection control allows for less turf damage when mowing or more traction for loader work or towing
  • Differential locking gives more traction in loose soil and rough terrain
  • Power steering allows for easier wheel turn with front loader and quicker maneuvering when mowing

    Hydrostatic Transmission with High/Low Range

    Twin-Touch foot controls allow for quick and easy transition from forward to reverse
    • Select low range for towing and loader work or high range for mowing or transportation
    • Cruise control offers the leg a rest for constant speed or open area mowing
    John Deere Height Selection Control  Mower Deck Height Selection Control
    • Set height with knob and lower deck in place with 3 point control
    • Use Lock Position for free use with 3 point for ground engaging work
    • Install positions drops deck to the ground for easy drive over removal

    Open Operator's Station
    • Sloping hood design provides improved visibility
    • Step-through textured flat operator station makes getting on and off the tractor easy from either side of the tractor 
    • Controls are located next to the fenders for operator convenience
    • Tilt steering wheel allows for ideal positioning for comfort

    3 Point Hitch with Optional iMatch Quick-Hitch
    • Limited category 1 3-point hitch can handle wide variety of attachments including the 270a backhoe
    • iMatch compatible for quick and easy change out of 3-point implements
    • Incremental 3-point height selection with rockshaft control
       
       
    Manufacturer
    MODEL
    John Deere
    2025R Compact Utility Tractor 
    Engine
    Family EYDXL1.27NS2 (Final Tier 4)
    Manufacturer Yanmar 3TNV80F
    Engine power 97/68/EC rated power (gross), hp (kW) 22.4 hp
    16.6 kW
    22.7 PS
    Power take-off (PTO) power - gear transmission, hp (kW) ---
    PTO power - hydrostatic transmission, hp (kW) 18 hp
    13.4 kW
    Rated engine speed 3000 rpm
    Type ---
    Operating range 1400-3235 rpm
    Aspiration Natural
    Cylinders/displacement, cu in. (L) 3 / 77.3 cu in.
    3 / 1.267 L
    Cylinder liners Cast-in-block
    Bore and stroke 3.15 x 3.31 in.
    80 x 84 mm
    Compression ratio 23.4:1
    Lubrication Pressurized
    Cooling system Water pump
    Air cleaner Dry-type, two stage
    Engine shutoff Key switch
    Engine torque at rated speed, lb-ft (N/m) 40.27 lb-ft
    54.6 Nm
    Fuel tank capacity (open-station; cab), U.S. gal. (L) 6.1; NA gal.
    23; NA L
    Electrical
    Type 12 volt
    Battery size (CCA) 500
    Alternator (12-V), amp 20 amp
    Starter size, hp (kW) 1.6 hp
    1.2 kW
    Fuel system
    Type ---
    Injection pump type Indirect Injection
    Fuel consumption 1.6 U.S. gal./hr
    6.1 L/hr
    *Fuel consumption rate should be used for comparison purposes only ---
    Transmission
    Standard transmission; forward/reverse Hydro; 2 Range
    Optional transmission; forward/reverse ---
    Left-hand reverser No
    On-the-go shifting N/A
    Direction reverser; forward/reverse Twin Touch pedals
    Forward speed ---
    Reverse speed ---
    Brakes Wet disk
    Steering Power steering
    Clutch, wet/dry N/A
    Clutch disk diameter wet clutch, in. (mm) ---
    Drawbar tongue weight capacity, lb (kg) 562 lb
    255 kg
    Axle capacity ---
    Front, lb (kg) 1940 lb
    880 kg
    Rear, lb (kg) 2426 lb
    1100 kg
    Creeper No
    Cruise control ---
    Differential lock ---
    Hydraulics
    Type Open Center
    Pump rated output, gpm (L/min) 5.6 gpm
    21.2 L/min
    Steering 2.2 (8.5)
    Implement 3.4 (12.7)
    Pump type Gear
    Maximum operating pressure (psi) 2421 psi
    Draft control type Position Control
    Remote control valves available 2
    3-point hitch
    Type Category I
    Lift capacity, 24-in. behind link arms, lb (kg) 1150 lb
    522 kg
    Lift capacity at lift link ends, lb (kg) 1433 lb
    650 kg
    Power take-off (PTO)
    Standard Standard Rear @ 540 RPM and Mid @ 2100 RPM std.
    Optional ---
    Control Independent
    Clutch Wet disk
    Brake (for mid and rear PTO) Wet disk
    Fluid capacities
    Fuel tank, gal. (L) 6.1 gal.
    23 L
    Cooling system (includes coolant bottle), qt (L) 3.4 qt
    3.2 L
    Crankcase with filter, qt (L) 3.4 qt
    3.2 L
    Transmission and hydraulic system gear, gal. (L) ---
    Transmission and hydraulic system hydrostatic, gal. (L) 2.6 gal.
    10.0 L
    Front axle gearcase (MFWD axle), gal. (L) 0.9 gal.
    3.4 L
    Final drive
    Type Spur Gear
    Engage on-the-go rear differential lock Yes
    Operator station
    Rollover protective structure OSHA, SAE, ASAE
    Type Foldable
    Platform - flat/straddle Flat
    Gear shift location - console/floor Left hand Side
    Mechanical front-wheel drive (MFWD) dimensions
    Wheelbase, in. (mm) 63.0 in.
    1600 mm
    Front tread range, in. (mm) 31.1 in.
    790 mm
    Front axle clearance, in. (mm) 12.5 in.
    318.4 mm
    Turning radius with brakes, ft (m) 6.7 ft
    2.04 m
    Turning radius without brakes, ft (m) 7.7 ft
    2.34 m
    Limited slip differential ---
    Unballasted operating weight, lb (kg) 1660 lb
    753 kg
    Approximate shipping weight (open-station; cab), lb (kg) 1660; NA lb
    753; NA kg
    Standard tires
    2WD ---
    Front ---
    Rear ---
    MFWD ---
    Front 23x8.5-12 R4
    Rear 31x12-16.5 R4
    Miscellaneous
    Underhood muffler Yes
    Joystick selective control valve (SCV) control Yes
    Inboard planetary No